Do not mount in or around a pool/spa area.
Metal finish |
---|
Both Stainless Steel and Zinc Plated Steel rails are manufactured to the same standards. Both are 14-gauge steel. If you are installing your system inside and not near any water (pool, jacuzzi, showers) you can use the Zinc-Plated Steel without any issues.
Each Rail must be secured to a wall stud (wood or metal) or to concrete. Appropriate hardware is included with each rail. Choose where you want your rail to start. Typically, the bottom rail begins just above any molding or wall trim. Place it on the wall over the stud and mark the mounting holes. Pre-drill holes if necessary. Place the rail back on the wall and screw the three screws in securely. Place the middle Rail on top repeat. Finish with the top Rail. See the installation form here for more specific information
Each section is 28” tall and 6” wide with 5 anchor points.
No these can be purchased individually (#908 or 909).
No, these can be placed in many different configurations as you need. You just need to make sure each rail is secured to a wall stud.
These are where you secure your Ez Lock Safety Slides. They lock your Web anchor straps into the slot for safety. Safety Slides are included with each Exercise Rail in the hardware packet. If you don’t receive them, please contact 800-544-7525.
That is the “escape hole” for dropped Safety Slides. Sometimes the Safety Slides get pushed into the slots too far and drop behind the Exercise Rail. Generally, they will fall to the bottom where you can pull them out.
The order was easy to place, exactly what we needed and all the pieces in the box.
LILY (verified owner) –
Great product that is sturdy and well made. Easy to install.
Jason Reyes (verified owner) –